SORT BY
MAGPUL HUNTER 700L STOCK – REMINGTON® 700 LONG ACTION
Magpul
Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Hunter 700L Stock – Remington 700 Long Action offers users a cost effective upgrade featuring fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Remington 700 Long Actions, this stock requires no bedding and is a true “drop-in” solution*. The 700L is also M-LOK® compatible to accept a broad range of accessories. Also compatible with our Magpul Bolt Action Magazine Well 700L, which allows the rifle to be used with detachable AICS-spec box magazines without the need for custom inletting. Made in the USA. STRONG BEDDING BLOCK Reinforced polymer shell with Type III hard anodized, machine finished, A380 cast aluminum V-bedding block DIMPLED DRILL POINTS AND OTHER SLING OPTIONS Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8" long dome stud) Push-button QD swivel compatibility in rear with optional Sling Mount Kits Left and Right rear 1-1/4" Footman's Loops ENHANCED ERGONOMICS Rubber recoil butt-pad included and optional OEM Butt-Pad Adapter available for use with aftermarket pads 60 degree grip angle from bore axis Tapered Beam design provides good rigidity through forend and will free-float compatible barrels SPACER SYSTEM FOR CUSTOM LENGTH OF PULL Adjustable LOP from 13.0"-15.0" with included 0.50" spacers M-LOK SLOTS FOR ADDITIONAL ACCESSORIES M-LOK slots on forend sides and bottom for a wide variety of accessory and sling mounting options OPTIONAL CHEEK RISERS FOR COMB HEIGHT ADJUSTMENT Optional 0.00", 0.50", and 0.75" Cheek Risers available to adjust cheek weld (stock comes pre-fitted with 0.25" Riser) AICS-SPEC PMAG 5 AC™ L, Standard - AICS Long Easily upgradeable to removable AICS-spec long action magazines (.30-06 or .300WM pattern) with the affordable Magpul Bolt Action Magazine Well 700L RESOURCES: MAG483 Hunter 700L Stock – Remington 700 Long Action Installation Instructions SPECIFICATIONS: Platform: Bolt Action, Remington 700 Compatibility: Standard Remington 700 pattern long action rifles (receiver mounting screw center-to-center of 7.375") with stock Remington hinged floorplates* Butt-Pad Dimensions: 1.5 x 5.0 in. LOP Adjustment Range: ~13.0-15.0 in. Weight: 3.2 lbs. without action and bottom metal (with two Spacers installed) Width of Butt, max: 1.5 in. Width of Forend, max: 2.3 in. *NOTE: Fits right-hand receivers only. Accepts ALL factory Remington barrels. Compatible with aftermarket barrel profiles up to a Medium Palma (0.920" dia. 5.50" forward of the breech). Accepts most factory and aftermarket triggers. All blind floorplate ADL models will require current factory Remington hinged bottom metal or the optional Magpul Bolt Action Magazine Well 700L Standard or Magnum.  Not compatible with Remington 700 DM models with their proprietary detachable box magazines. Due to interference with raised Cheek Risers, not compatible with the ISS system (J-Lock bolt) without modification. Regardless of bolt used, all raised Cheek Risers will need to be temporarily detached to remove the bolt for maintenance. Since factory action mounting screws can come in a variety of lengths, grinding to length or utilizing longer replacements may be necessary to optimize fit with the Hunter 700L. PART # & COLOUR: MAG483-BLK Black MAG483-FDE Flat Dark Earth MAG483-GRY Stealth Grey Stock image may be displayed. Actual product may not be exactly as shown. Firearm/holster/ammunition/accessories, etc not included.  
Brand
Magpul
UPC
SKU
MAG483
Price
$399.99 $179.99
Please select options

Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Hunter 700L Stock – Remington 700 Long Action offers users a cost effective upgrade featuring fully adjustable length of pull, comb height, and enhanced ergonomics.

Compatible with Remington 700 Long Actions, this stock requires no bedding and is a true “drop-in” solution*. The 700L is also M-LOK® compatible to accept a broad range of accessories.

Also compatible with our Magpul Bolt Action Magazine Well 700L, which allows the rifle to be used with detachable AICS-spec box magazines without the need for custom inletting.

Made in the USA.

https://magpul.com/media/wysiwyg/mag483-feature_hunter_700l_stock-remington_700_long_action_01.jpg

STRONG BEDDING BLOCK

  • Reinforced polymer shell with Type III hard anodized, machine finished, A380 cast aluminum V-bedding block

https://magpul.com/media/wysiwyg/mag483-feature_hunter_700l_stock-remington_700_long_action_02.jpg

DIMPLED DRILL POINTS AND OTHER SLING OPTIONS

  • Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8" long dome stud)
  • Push-button QD swivel compatibility in rear with optional Sling Mount Kits
  • Left and Right rear 1-1/4" Footman's Loops

https://magpul.com/media/wysiwyg/mag483-feature_hunter_700l_stock-remington_700_long_action_03.jpg

ENHANCED ERGONOMICS

  • Rubber recoil butt-pad included and optional OEM Butt-Pad Adapter available for use with aftermarket pads
  • 60 degree grip angle from bore axis
  • Tapered Beam design provides good rigidity through forend and will free-float compatible barrels

https://magpul.com/media/wysiwyg/mag483-feature_hunter_700l_stock-remington_700_long_action_04.jpg

SPACER SYSTEM FOR CUSTOM LENGTH OF PULL

  • Adjustable LOP from 13.0"-15.0" with included 0.50" spacers

https://magpul.com/media/wysiwyg/mag483-feature_hunter_700l_stock-remington_700_long_action_05.jpg

M-LOK SLOTS FOR ADDITIONAL ACCESSORIES

M-LOK slots on forend sides and bottom for a wide variety of accessory and sling mounting options

https://magpul.com/media/wysiwyg/mag483-feature_hunter_700l_stock-remington_700_long_action_06.jpg

OPTIONAL CHEEK RISERS FOR COMB HEIGHT ADJUSTMENT

Optional 0.00", 0.50", and 0.75" Cheek Risers available to adjust cheek weld (stock comes pre-fitted with 0.25" Riser)

https://magpul.com/media/wysiwyg/mag483-feature_hunter_700l_stock-remington_700_long_action_07.jpg

AICS-SPEC PMAG 5 AC™ L, Standard - AICS Long

  • Easily upgradeable to removable AICS-spec long action magazines (.30-06 or .300WM pattern) with the affordable Magpul Bolt Action Magazine Well 700L

RESOURCES:

SPECIFICATIONS:

  • Platform: Bolt Action, Remington 700
  • Compatibility: Standard Remington 700 pattern long action rifles (receiver mounting screw center-to-center of 7.375") with stock Remington hinged floorplates*
  • Butt-Pad Dimensions: 1.5 x 5.0 in.
  • LOP Adjustment Range: ~13.0-15.0 in.
  • Weight: 3.2 lbs. without action and bottom metal (with two Spacers installed)
  • Width of Butt, max: 1.5 in.
  • Width of Forend, max: 2.3 in.

*NOTE: Fits right-hand receivers only.

Accepts ALL factory Remington barrels.

Compatible with aftermarket barrel profiles up to a Medium Palma (0.920" dia. 5.50" forward of the breech).

Accepts most factory and aftermarket triggers.

All blind floorplate ADL models will require current factory Remington hinged bottom metal or the optional Magpul Bolt Action Magazine Well 700L Standard or Magnum.  Not compatible with Remington 700 DM models with their proprietary detachable box magazines.

Due to interference with raised Cheek Risers, not compatible with the ISS system (J-Lock bolt) without modification. Regardless of bolt used, all raised Cheek Risers will need to be temporarily detached to remove the bolt for maintenance.

Since factory action mounting screws can come in a variety of lengths, grinding to length or utilizing longer replacements may be necessary to optimize fit with the Hunter 700L.

PART # & COLOUR:

  • MAG483-BLK Black
  • MAG483-FDE Flat Dark Earth
  • MAG483-GRY Stealth Grey

Stock image may be displayed. Actual product may not be exactly as shown.

Firearm/holster/ammunition/accessories, etc not included.

 

UPC
Category
Parts
Manufacturer
Magpul

Shipping Policy